Telkom SA APN Settings 2026 - LTE & 5G Guide
Configure Telkom SA mobile data settings on Android and iOS
Manually configure your Telkom SA APN settings to enable LTE or 5G mobile data and MMS in South Africa. The default APN for Telkom internet is 'internet'. Telkom SA operates on MCC 655 and MNC 02, offering mobile services across South Africa through its LTE and growing 5G network. Telkom Mobile was previously known as 8ta. Imported or factory-unlocked devices may require manual APN entry.
Telkom SA APN Settings
Use these settings to configure your Telkom SA mobile data connection.
| Setting | Value |
|---|---|
| APN | internet |
| MCC | 655 |
| MNC | 02 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4/IPv6 |
| Username | Not required |
| Password | Not required |
How to Configure Telkom SA APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'Telkom Internet' and APN to 'internet'.
- 7 Enter MMSC as 'http://mms.8ta.com:38090/was' and MMS Proxy as '41.151.254.162' with MMS Port '8080'.
- 8 Set APN Type to 'default,supl,mms' and APN Protocol to 'IPv4/IPv6'.
- 9 Tap Save and select the new Telkom APN from the list.
- 10 Restart your device to apply the settings.
How to Configure Telkom SA APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'internet' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'mms' and MMSC as 'http://mms.8ta.com:38090/was'.
- 6 Set MMS Proxy to '41.151.254.162:8080'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring Telkom SA APN settings.
- No data connection on Telkom SA SIM
- Verify the APN is set to 'internet' in lowercase. Some devices may also work with 'TelkomInternet' as the APN. Toggle Airplane Mode on and off after saving. Check your Telkom data balance by dialing *180# or using the Telkom app.
- MMS not sending on Telkom
- The MMS APN for Telkom is 'mms' with MMSC 'http://mms.8ta.com:38090/was', proxy '41.151.254.162', and port '8080'. The MMSC URL uses the legacy 8ta domain which remains valid. Mobile data must be active for MMS delivery. Ensure APN Type includes 'mms'.
- Telkom LTE signal weak or dropping
- Check that your device supports Telkom LTE bands used in South Africa (Band 3 at 1800 MHz and Band 28 at 700 MHz). Set preferred network type to LTE in device settings. Move to an area with better coverage. Restart your device to re-register on the network.
Telkom SA APN Settings FAQ
What is the correct Telkom SA APN?
The correct APN for Telkom South Africa internet is 'internet'. An alternative APN 'TelkomInternet' may also work on some devices. No username or password is required for either option. The MMS APN is 'mms' with separate MMSC settings. Both prepaid and contract Telkom subscribers use the same APN configuration for data access.
What are the Telkom SA MCC and MNC codes?
Telkom SA uses MCC 655 (South Africa country code) and MNC 02 (Telkom Mobile identifier). These values are automatically read from the SIM card by your device. Manual entry is only needed if the fields appear blank in your APN settings. The MNC 02 was assigned to Telkom when it launched mobile services as 8ta.
Does Telkom SA require a username or password?
No, Telkom SA does not require a username or password for its APN configuration. Leave both fields blank when setting up the 'internet' or 'mms' access point profiles. Authentication type should be set to None. This applies to all Telkom Mobile plan types including FreeMe, LIT Mobile, and data-only SIM cards.
Is the Telkom MMS MMSC still 8ta.com?
Yes, the Telkom MMS MMSC URL remains 'http://mms.8ta.com:38090/was' using the legacy 8ta domain. Despite the rebranding from 8ta to Telkom Mobile, the MMS server address has not changed. The MMS Proxy is '41.151.254.162' with port '8080'. This configuration continues to work for all Telkom Mobile subscribers.
How do I get Telkom APN settings automatically?
Telkom automatically sends APN configuration when a new SIM is activated. If settings are not received, restart your device or contact Telkom support at 180 from a Telkom number. You can also use the Telkom app to manage your connection settings. For imported devices, manual entry using the values on this page is the recommended approach.