MTN APN Settings 2026 - 5G & 4G LTE Guide
Configure MTN mobile data settings on Android and iOS
Manually configure your MTN APN settings to enable 5G or 4G LTE mobile data and MMS in South Africa. The default APN for MTN internet is 'internet'. MTN South Africa operates on MCC 655 and MNC 10 as the largest mobile operator in the country with over 30 million subscribers. MTN provides 5G coverage in select metropolitan areas. Imported or unlocked devices may need manual APN configuration.
MTN APN Settings
Use these settings to configure your MTN mobile data connection.
| Setting | Value |
|---|---|
| APN | internet |
| MCC | 655 |
| MNC | 10 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4 |
| Username | Not required |
| Password | Not required |
How to Configure MTN APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'MTN Internet' and APN to 'internet'.
- 7 Enter MMSC as 'http://mms.mtn.co.za/mms/wapenc' and MMS Proxy as '196.11.240.241' with MMS Port '8080'.
- 8 Set APN Type to 'default,supl,mms' and APN Protocol to 'IPv4'.
- 9 Tap Save and select the new MTN APN from the list.
- 10 Restart your device to apply the settings.
How to Configure MTN APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'internet' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'myMTN' and MMSC as 'http://mms.mtn.co.za/mms/wapenc'.
- 6 Set MMS Proxy to '196.11.240.241:8080'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring MTN APN settings.
- No data connection on MTN SIM
- Verify the APN is set to 'internet' in lowercase. Toggle Airplane Mode on and off after saving. Check that your MTN airtime or data bundle is active by dialing *141#. If the issue persists, reset network settings and re-enter the APN values manually.
- MMS not working on MTN
- For MMS, use a separate APN 'myMTN' with username 'mtnmms' and password 'mtnmms'. Set MMSC to 'http://mms.mtn.co.za/mms/wapenc' with proxy '196.11.240.241' and port '8080'. Authentication type should be PAP for the MMS APN. Mobile data must be enabled.
- MTN 5G not showing on device
- Confirm your MTN plan includes 5G access and your device supports South African 5G bands (n78 at 3500 MHz). Check 5G coverage in your area using the MTN website. Update your SIM to a 5G-compatible card at any MTN store. Set network mode to 5G/NR in device settings.
MTN APN Settings FAQ
What is the correct MTN APN for South Africa?
The correct APN for MTN internet in South Africa is 'internet'. This is the standard access point for mobile data. For MMS, use a separate APN named 'myMTN' with username 'mtnmms' and password 'mtnmms'. The internet APN does not require any username or password. Enter the APN in lowercase for proper configuration on all device types.
What are the MTN MCC and MNC codes?
MTN South Africa uses MCC 655 (South Africa country code) and MNC 10 (MTN network identifier). These codes are automatically detected from the SIM card. Manual entry is only needed if the fields appear blank in your APN settings. The MCC/MNC combination uniquely identifies MTN on the South African mobile network infrastructure.
Does MTN APN need a username and password?
The MTN internet APN does not require a username or password. Leave both fields blank for the 'internet' APN. However, the MMS APN 'myMTN' requires username 'mtnmms' and password 'mtnmms' with PAP authentication. Some configurations may also list username as 'guest' for the internet APN, but blank credentials work on most devices.
How do I get MTN APN settings automatically?
Dial 30111 from your MTN number to receive automatic APN settings via SMS. You can also use the MTN app to request configuration settings. Visit an MTN store for in-person assistance with device setup. For imported or unlocked devices, manual setup using the values provided on this page is recommended for the most reliable connectivity.
What is the MTN MMS APN?
The MTN MMS APN is 'myMTN' with username 'mtnmms' and password 'mtnmms'. The MMSC URL is 'http://mms.mtn.co.za/mms/wapenc' with proxy '196.11.240.241' and port '8080'. Authentication type should be set to PAP. This separate APN is needed on devices that require individual access points for data and multimedia messaging services.