Mobily APN Settings 2026 - 5G & 4G LTE Guide
Configure Mobily mobile data settings on Android and iOS
Manually configure your Mobily APN settings to enable 5G or 4G LTE mobile data and MMS in Saudi Arabia. The default APN for Mobily internet is 'web2'. Mobily (Etihad Etisalat) operates on MCC 420 and MNC 03 as the second-largest mobile operator in Saudi Arabia. Mobily provides extensive 5G coverage in major Saudi cities. Devices imported from abroad typically need manual APN configuration.
Mobily APN Settings
Use these settings to configure your Mobily mobile data connection.
| Setting | Value |
|---|---|
| APN | web2 |
| MCC | 420 |
| MNC | 03 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4 |
| Username | Not required |
| Password | Not required |
How to Configure Mobily APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'Mobily Internet' and APN to 'web2'.
- 7 Enter MMSC as 'http://10.3.3.133:9090/was' and MMS Proxy as '10.3.2.133' with MMS Port '8080'.
- 8 Set APN Type to 'default,supl,mms' and APN Protocol to 'IPv4'.
- 9 Tap Save and select the new Mobily APN from the list.
- 10 Restart your device to apply the settings.
How to Configure Mobily APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'web2' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'mms1' and MMSC as 'http://10.3.3.133:9090/was'.
- 6 Set MMS Proxy to '10.3.2.133:8080'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring Mobily APN settings.
- No data connection on Mobily SIM
- Verify the APN is set to 'web2'. An alternative APN 'web1' may also work if 'web2' does not connect. Toggle Airplane Mode on and off after saving. Check your Mobily account balance and data plan status by dialing *1411# or using the Mobily app.
- MMS not sending on Mobily
- Ensure MMSC is 'http://10.3.3.133:9090/was' with MMS Proxy '10.3.2.133' and port '8080'. The MMS APN should be 'mms1' or 'mms2'. Mobile data must be active for MMS. If using a single APN profile, ensure APN Type includes 'mms' in the comma-separated list.
- Mobily 5G not available
- Check that your Mobily plan includes 5G access and your device supports 5G bands (n78 at 3500 MHz and n41). Verify 5G coverage in your area using the Mobily app. Update your SIM card at a Mobily store if it is not 5G-compatible. Set preferred network type to 5G/NR in device settings.
Mobily APN Settings FAQ
What is the correct Mobily APN?
The correct APN for Mobily internet in Saudi Arabia is 'web2'. An alternative APN 'web1' is also valid and may work better on some devices. No username or password is required for either APN. The MMS-specific APN is 'mms1' or 'mms2' for devices that use separate access points for data and multimedia messaging.
What are the Mobily MCC and MNC codes?
Mobily uses MCC 420 (Saudi Arabia country code) and MNC 03 (Mobily/Etihad Etisalat identifier). These values are automatically read from the SIM card by your device. Manual entry is only required if the fields appear empty in your APN settings. All Mobily plan types use the same MCC and MNC codes.
Do I need a username and password for Mobily APN?
No, Mobily does not require a username or password for the 'web2' APN configuration. Leave both fields blank when creating the access point profile. Authentication type should be set to None. This applies to all Mobily subscriptions including prepaid, postpaid, and data-only SIM plans in Saudi Arabia.
What is the difference between web1 and web2 APN on Mobily?
Both 'web1' and 'web2' are valid APNs for Mobily internet access. The 'web2' APN is the more commonly recommended option and works on the majority of devices. Some older devices or specific plan types may connect better using 'web1'. If one APN does not establish a data connection, try the other as an alternative.
How do I get Mobily APN settings automatically?
Mobily can send automatic APN configuration to your device. Dial *1100# from your Mobily number or use the Mobily app to request internet settings. You can also visit a Mobily store for configuration assistance. For imported or unlocked devices, manual setup using the values on this page is the most reliable method to establish connectivity.