U Mobile APN Settings 2026 - 5G & 4G LTE Guide

Configure U Mobile mobile data settings on Android and iOS

Manually configure your U Mobile APN settings to enable 5G or 4G LTE mobile data and MMS in Malaysia. The default APN for U Mobile is 'my3g'. U Mobile Sdn Bhd operates on MCC 502 and MNC 18 as one of Malaysia's major mobile operators. U Mobile offers prepaid and postpaid plans with nationwide 4G LTE coverage and expanding 5G service through Digital Nasional Berhad.

U Mobile APN Settings

Use these settings to configure your U Mobile mobile data connection.

SettingValue
APNmy3g
MCC502
MNC18
AuthenticationPAP
APN Typedefault,supl,mms
APN ProtocolIPv4
UsernameNot required
PasswordNot required

How to Configure U Mobile APN on Android

  1. 1 Open Settings on your Android device.
  2. 2 Go to Network & Internet or Connections.
  3. 3 Tap Mobile Network or Mobile Data.
  4. 4 Select Access Point Names (APN).
  5. 5 Tap the + icon to add a new APN.
  6. 6 Set Name to 'U Mobile Internet' and APN to 'my3g'.
  7. 7 Enter MMSC as 'http://mms.u.com.my' and MMS Proxy as '10.10.11.20' with MMS Port '8080'.
  8. 8 Set Authentication Type to 'PAP' and APN Type to 'default,supl,mms'.
  9. 9 Tap Save and select the new U Mobile APN from the list.
  10. 10 Restart your device to apply the settings.

How to Configure U Mobile APN on iPhone/iOS

  1. 1 Open Settings on your iPhone.
  2. 2 Tap Cellular or Mobile Data.
  3. 3 Select Cellular Data Network.
  4. 4 Enter 'my3g' in the APN field under Cellular Data.
  5. 5 Leave Username and Password fields blank.
  6. 6 Under MMS, enter APN as 'my3g' and MMSC as 'http://mms.u.com.my'.
  7. 7 Set MMS Proxy to '10.10.11.20:8080'.
  8. 8 Go back to save the settings.
  9. 9 Restart your iPhone to apply changes.

Troubleshooting

Common issues and solutions when configuring U Mobile APN settings.

No data connection on U Mobile SIM
Verify the APN is set to 'my3g'. Set Authentication Type to PAP. Toggle Airplane Mode on and off after saving. Check that your U Mobile data plan is active by dialing *118#. If the issue persists, reset network settings and re-enter the APN.
MMS not sending on U Mobile
Ensure MMSC is 'http://mms.u.com.my' with MMS Proxy '10.10.11.20' and port '8080'. Mobile data must be active for MMS delivery. If MMS still fails, try the alternative MMSC URL 'http://10.30.3.11/servlets/mms' with proxy '10.30.5.11'.
U Mobile 5G not available
U Mobile 5G access is provided through Digital Nasional Berhad (DNB) and requires a compatible plan and device. Check that your device supports the n28 and n78 5G bands. Visit a U Mobile store to ensure your SIM is 5G-enabled. Coverage is currently limited to select urban areas.

U Mobile APN Settings FAQ

What is the correct U Mobile APN?

The correct APN for U Mobile internet in Malaysia is 'my3g'. This APN handles both mobile data and MMS traffic. No username or password is typically required, though some configurations use PAP authentication. The 'my3g' APN works for all U Mobile plan types including prepaid, postpaid, and the HERO plans.

What are the U Mobile MCC and MNC codes?

U Mobile uses MCC 502 (Malaysia country code) and MNC 18 (U Mobile network identifier). These codes are automatically populated from the SIM card. You only need to enter them manually if the fields appear blank in your APN settings. The MCC/MNC combination uniquely identifies U Mobile on the Malaysian mobile network.

Does U Mobile APN require a username and password?

U Mobile APN settings typically do not require a username and password for standard data access. However, PAP authentication is listed as the authentication type. If you experience connection issues, try leaving username and password blank first. If that does not work, the authentication type PAP without credentials should resolve most connectivity problems.

What is the U Mobile MMS proxy address?

The primary U Mobile MMS proxy is '10.10.11.20' with port '8080'. An alternative MMS configuration uses proxy '10.30.5.11' with port '8080' and MMSC URL 'http://10.30.3.11/servlets/mms'. Try the primary configuration first and switch to the alternative if MMS delivery fails. Both configurations are valid for the U Mobile network.

How do I check my U Mobile data balance?

Dial *118# from your U Mobile number to access the self-service menu where you can check your data balance and plan details. You can also download the MyUMobile app from Google Play Store or Apple App Store for real-time usage tracking. The app displays remaining data, validity period, and allows you to purchase additional data packages.