CelcomDigi APN Settings 2026 - 5G & 4G Guide
Configure CelcomDigi mobile data settings on Android and iOS
Manually configure your CelcomDigi APN settings to enable 5G or 4G LTE mobile data and MMS in Malaysia. The default APN for CelcomDigi is 'celcom3g'. CelcomDigi was formed from the merger of Celcom and Digi in 2022 and operates on MCC 502 with MNC 13 (Celcom) and MNC 19 (Digi). Both legacy Celcom and Digi SIM cards work with the same APN configuration on the unified CelcomDigi network.
CelcomDigi APN Settings
Use these settings to configure your CelcomDigi mobile data connection.
| Setting | Value |
|---|---|
| APN | celcom3g |
| MCC | 502 |
| MNC | 13 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4/IPv6 |
| Username | Not required |
| Password | Not required |
How to Configure CelcomDigi APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'CelcomDigi' and APN to 'celcom3g'.
- 7 Enter MMSC as 'http://mms.celcom.net.my' and MMS Proxy as '10.128.1.242' with MMS Port '80'.
- 8 Set APN Type to 'default,supl,mms' and APN Protocol to 'IPv4/IPv6'.
- 9 Tap Save and select the new CelcomDigi APN from the list.
- 10 Restart your device to apply the settings.
How to Configure CelcomDigi APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'celcom3g' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'celcom3g' and MMSC as 'http://mms.celcom.net.my'.
- 6 Set MMS Proxy to '10.128.1.242:80'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring CelcomDigi APN settings.
- No data connection on CelcomDigi SIM
- Use APN 'celcom3g' for both legacy Celcom and Digi SIM cards. The alternative APN 'celcom5g' is also valid for newer plans. Toggle Airplane Mode on and off after saving. Ensure your data plan is active by dialing *118# (Celcom) or *126# (Digi).
- MMS not working on CelcomDigi
- Verify MMSC is 'http://mms.celcom.net.my' with MMS Proxy '10.128.1.242' and port '80'. Note the MMS port is 80, not 8080. Mobile data must be enabled for MMS delivery. Ensure the APN Type field includes 'mms' in the comma-separated list.
- CelcomDigi 5G not available
- Check that your plan supports 5G and your device is compatible with Malaysian 5G bands (n28 and n78 via DNB). Visit a CelcomDigi store to upgrade your SIM to a 5G card if needed. Try using APN 'celcom5g' as an alternative. Set network mode to 5G/NR in device settings.
CelcomDigi APN Settings FAQ
What is the correct CelcomDigi APN?
The standard APN for CelcomDigi in Malaysia is 'celcom3g'. This APN works for both legacy Celcom and Digi subscribers on the merged network. An alternative APN 'celcom5g' is also available for newer plans with 5G access. No username or password is required for either APN. Both APNs support 4G LTE and 5G connections.
What are the CelcomDigi MCC and MNC codes?
CelcomDigi uses MCC 502 (Malaysia country code) with two MNC codes - MNC 13 for legacy Celcom SIMs and MNC 19 for legacy Digi SIMs. Both MNC values work on the merged CelcomDigi network. Your device reads the correct MNC from the SIM card automatically. There is no need to change your SIM card after the merger.
Do Digi APN settings work on CelcomDigi?
Yes, legacy Digi APN settings continue to work on the CelcomDigi network. However, for best compatibility, use the CelcomDigi APN 'celcom3g' on both Celcom and Digi SIM cards. The networks have been fully merged, and both SIM types connect to the same infrastructure. Old Digi APNs like 'diginet' may still function but are no longer officially recommended.
Do I need a username and password for CelcomDigi?
No, CelcomDigi does not require a username or password for the APN configuration. Leave both fields blank when creating the access point profile. Authentication type should be set to None. This applies to all CelcomDigi plan types including prepaid, postpaid, and legacy Celcom and Digi subscriptions.
How do I switch from Digi APN to CelcomDigi?
Go to your device APN settings, delete or disable the existing Digi APN, and create a new APN with name 'CelcomDigi' and APN 'celcom3g'. Add the MMSC URL 'http://mms.celcom.net.my' with proxy '10.128.1.242' and port '80'. Save and restart your device. The transition requires no SIM card change or account modification.