BSNL APN Settings 2026 - 4G & LTE Configuration
Configure BSNL mobile data settings on Android and iOS
Manually configure your BSNL APN settings to restore mobile data and MMS on your device. The default APN for BSNL 4G LTE service across India is 'bsnlnet'. BSNL operates across all Indian telecom circles with MCC 404 and MNC values that vary by region (34, 38, 66 among others). Unlocked or imported devices often require manual APN entry to connect to the BSNL network.
BSNL APN Settings
Use these settings to configure your BSNL mobile data connection.
| Setting | Value |
|---|---|
| APN | bsnlnet |
| MCC | 404 |
| MNC | 34 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4/IPv6 |
| Username | Not required |
| Password | Not required |
How to Configure BSNL APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'BSNL Internet' and APN to 'bsnlnet'.
- 7 Enter MMSC as 'http://bsnlmmsc.in:8514/' and MMS Proxy as '10.210.10.11' with MMS Port '8080'.
- 8 Set APN Type to 'default,supl,mms'.
- 9 Tap Save and select the new BSNL APN from the list.
- 10 Restart your phone to apply changes.
How to Configure BSNL APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'bsnlnet' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'bsnlnet' and MMSC as 'http://bsnlmmsc.in:8514/'.
- 6 Set MMS Proxy to '10.210.10.11' and MMS Max Message Size to '1048576'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring BSNL APN settings.
- No mobile data after inserting BSNL SIM
- Verify the APN is set to 'bsnlnet' and not 'internet'. Toggle Airplane Mode on and off. If the issue persists, reset your network settings from Settings and re-enter the APN values manually.
- MMS messages not sending or receiving
- Ensure the MMSC URL is entered exactly as 'http://bsnlmmsc.in:8514/' with the trailing slash. Confirm MMS Proxy is '10.210.10.11' and Port is '8080'. MMS requires mobile data to be active and does not work over WiFi alone.
- APN keeps resetting or disappearing after reboot
- Some devices reset APN settings after a SIM swap or system update. Save the APN profile, then set it as the default. If the issue continues, update your device software and re-enter the APN. Contact BSNL customer care at 1800-180-1503 if problems persist.
BSNL APN Settings FAQ
What is the correct BSNL APN for 4G internet?
The correct APN for BSNL 4G internet service across all circles in India is 'bsnlnet'. This single APN handles both data and MMS traffic. Older configurations may reference 'bsnlmms' separately for multimedia messages, but 'bsnlnet' with the proper MMSC URL covers both functions on modern 4G LTE devices.
What are the BSNL MCC and MNC codes?
BSNL uses MCC 404 for India. The MNC varies by telecom circle - common values include 34 (Haryana), 38 (Assam), 66 (Maharashtra), 72 (Kerala), and 64 among others. Your device typically auto-detects the correct MNC based on your SIM card and circle. Manual entry is usually not required for the MNC field.
Why is BSNL 4G slow even with correct APN settings?
Slow BSNL 4G speeds can result from network congestion, weak signal, or incorrect APN protocol settings. Set APN Protocol to IPv4/IPv6 for best performance. Check that your device supports BSNL 4G bands (Band 3 at 1800 MHz and Band 40 at 2300 MHz). Running a speed test can help identify whether the issue is with your connection or the network.
Do I need a username and password for BSNL APN?
No, BSNL does not require a username or password for the 'bsnlnet' APN configuration. Leave both fields blank when setting up the access point. Authentication type should be set to None. If your device pre-fills these fields, clear them and save the settings again.
How do I get BSNL APN settings automatically?
Send a blank SMS to 1925 from your BSNL number to receive automatic APN configuration settings via an OTA (over-the-air) message. Alternatively, dial *#*#4636#*#* on Android to access the phone testing menu where you can verify your APN configuration. Manual setup using the values on this page works on all device types.