Rogers APN Settings 2026 - 5G & LTE Configuration
Configure Rogers mobile data settings on Android and iOS
Manually configure your Rogers APN settings to fix mobile data or MMS issues on your device. The recommended APN for Rogers 5G and LTE devices in Canada is 'ltemobile.apn'. Most Rogers-branded phones set this automatically, but unlocked devices or phones brought from other carriers may need manual configuration. Use the values below to restore your Rogers data connection.
Rogers APN Settings
Use these settings to configure your Rogers mobile data connection.
| Setting | Value |
|---|---|
| APN | ltemobile.apn |
| MCC | 302 |
| MNC | 720 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4/IPv6 |
| Username | Not required |
| Password | Not required |
How to Configure Rogers APN on Android
- 1 Open Settings on your Android device
- 2 Go to Network & Internet or Connections
- 3 Tap Mobile Network or Mobile Data
- 4 Select Access Point Names (APN)
- 5 Tap the + icon or Menu to add a new APN
- 6 Enter the Rogers APN settings shown above
- 7 Tap Save or the checkmark to save
- 8 Select the new Rogers APN from the list
How to Configure Rogers APN on iPhone/iOS
- 1 Open Settings on your iPhone
- 2 Tap Cellular or Mobile Data
- 3 Select Cellular Data Options
- 4 Tap Cellular Network or APN Settings
- 5 Enter the Rogers APN settings
- 6 Go back to save the settings
- 7 Restart your iPhone to apply changes
Troubleshooting
Common issues and solutions when configuring Rogers APN settings.
- No data connection on Rogers network
- Ensure the APN is set to 'ltemobile.apn' and APN type is 'default,supl,mms'. Toggle Airplane Mode on and off. If the problem continues, go to Settings and reset network settings, then re-enter the APN values and restart your device.
- Cannot send or receive MMS on Rogers
- Verify the MMSC URL is 'http://mms.gprs.rogers.com' and the MMS Proxy is '10.128.1.69' with port 80. MMS requires an active mobile data connection and will not work over WiFi only. Clear the messaging app cache and retry.
- Slow data speeds on Rogers LTE
- Check that APN Protocol is set to 'IPv4/IPv6' for optimal routing. If speeds remain slow, delete the existing APN profile, create a new one with the correct settings, and restart. Slow speeds may also indicate network congestion in your area.
Rogers APN Settings FAQ
What is the correct Rogers APN setting?
The correct APN for Rogers in Canada is 'ltemobile.apn'. This is the recommended setting for all Rogers 5G and LTE smartphones. An older alternative APN is 'internet.com' which was used on 3G devices. For modern devices on the Rogers network, 'ltemobile.apn' provides the best performance and supports both data and MMS services.
What are the Rogers MCC and MNC codes?
Rogers Wireless uses MCC 302 and MNC 720. MCC 302 identifies Canada as the country, and MNC 720 identifies the Rogers network. These codes are typically detected automatically when a Rogers SIM is inserted. If your device does not auto-populate these fields, enter them manually in the APN configuration screen.
Do Fido and Chatr use the same APN as Rogers?
No, Fido and Chatr use different APN settings even though they operate on the Rogers network. Fido uses 'ltemobile.apn' with its own MMSC at 'http://mms.fido.ca', while Chatr uses 'chatrweb.apn' with a separate MMS configuration. Each brand has distinct APN values that must be configured individually for data and MMS to work properly.
Why does my unlocked phone not get data on Rogers?
Unlocked phones from other carriers or purchased internationally often lack Rogers carrier configuration profiles. You need to manually add the Rogers APN by entering 'ltemobile.apn' in the APN field, setting the MMSC to the correct URL, and specifying MCC 302 and MNC 720. Save the profile, select it as active, and restart your phone.
How do I reset Rogers APN settings on Android?
To reset Rogers APN settings on Android, go to Settings, then Network and Internet, then Mobile Network, then Access Point Names. Tap the three-dot menu and select 'Reset to default'. If the default settings do not work, manually add a new APN with 'ltemobile.apn' and the MMSC URL 'http://mms.gprs.rogers.com'. Save and restart your device.