Bell APN Settings 2026 - 5G & LTE Configuration
Configure Bell mobile data settings on Android and iOS
Manually configure your Bell APN settings to restore mobile data and MMS on your device. The default APN for Bell Mobility 5G and LTE devices in Canada is 'pda.bell.ca'. Most Bell-branded phones configure this automatically, but unlocked devices or phones experiencing connectivity issues may require manual setup. Use the values below to enable your Bell data connection.
Bell APN Settings
Use these settings to configure your Bell mobile data connection.
| Setting | Value |
|---|---|
| APN | pda.bell.ca |
| MCC | 302 |
| MNC | 610 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4/IPv6 |
| Username | Not required |
| Password | Not required |
How to Configure Bell APN on Android
- 1 Open Settings on your Android device
- 2 Go to Network & Internet or Connections
- 3 Tap Mobile Network or Mobile Data
- 4 Select Access Point Names (APN)
- 5 Tap the + icon or Menu to add a new APN
- 6 Enter the Bell APN settings shown above
- 7 Tap Save or the checkmark to save
- 8 Select the new Bell APN from the list
How to Configure Bell APN on iPhone/iOS
- 1 Open Settings on your iPhone
- 2 Tap Cellular or Mobile Data
- 3 Select Cellular Data Options
- 4 Tap Cellular Network or APN Settings
- 5 Enter the Bell APN settings
- 6 Go back to save the settings
- 7 Restart your iPhone to apply changes
Troubleshooting
Common issues and solutions when configuring Bell APN settings.
- No mobile data after inserting Bell SIM
- Verify the APN is set to 'pda.bell.ca' and the APN type includes 'default,supl,mms'. Toggle Airplane Mode on and off, then restart your device. Ensure your Bell plan includes data service.
- MMS messages not sending or receiving
- Confirm the MMSC is set to 'http://mms.bell.ca/mms/wapenc' and MMS Proxy is 'web.wireless.bell.ca' with port 80. MMS requires mobile data to be enabled and does not work over WiFi alone.
- APN settings reset after restart
- Some unlocked devices reset APN settings after reboot. Go to Settings and re-select the Bell APN profile. If the issue persists, reset network settings under Settings, then re-enter the APN values.
Bell APN Settings FAQ
What is the correct Bell APN for Canada?
The correct APN for Bell Mobility in Canada is 'pda.bell.ca'. This APN works for all Bell 5G, LTE, and 4G devices. Older Bell configurations may reference 'internet' as the APN, but 'pda.bell.ca' is the current standard setting that supports both mobile data and MMS messaging on the Bell network.
What are the Bell MCC and MNC codes?
Bell Mobility uses MCC 302 and MNC 610. MCC 302 is the mobile country code for Canada, and MNC 610 identifies the Bell Mobility network. These values are usually filled in automatically by your device when a Bell SIM is inserted, but you may need to enter them manually on unlocked or imported phones.
Why is my Bell data not working on an unlocked phone?
Unlocked phones often lack Bell carrier profiles and require manual APN configuration. Enter 'pda.bell.ca' as the APN, set the APN type to 'default,supl,mms', and ensure the MMSC URL is correct. After saving, restart your phone. If data still does not work, confirm your Bell SIM is activated and your plan includes data.
Do Bell MVNOs use the same APN settings?
No, Bell MVNOs like Lucky Mobile and Virgin Plus use their own APN settings, not 'pda.bell.ca'. Lucky Mobile uses the APN 'connect' and Virgin Plus has its own configuration. While these brands operate on the Bell network with MCC 302 and MNC 610, each has distinct APN values for data and MMS.
How do I fix Bell MMS not working on Android?
To fix Bell MMS issues on Android, verify the MMSC is 'http://mms.bell.ca/mms/wapenc' and the MMS Proxy is 'web.wireless.bell.ca' on port 80. Ensure mobile data is turned on, as MMS does not transmit over WiFi. Clear the messaging app cache, restart your device, and try sending again.