Robi APN Settings 2026 - 4G LTE Configuration
Configure Robi mobile data settings on Android and iOS
Manually configure your Robi APN settings to enable 4G LTE mobile data and MMS in Bangladesh. The default APN for Robi internet access is 'internet'. Robi Axiata Limited operates on MCC 470 and MNC 02, serving over 50 million subscribers as one of the largest mobile operators in Bangladesh. Devices purchased outside Bangladesh or unlocked handsets may need manual APN setup.
Robi APN Settings
Use these settings to configure your Robi mobile data connection.
| Setting | Value |
|---|---|
| APN | internet |
| MCC | 470 |
| MNC | 02 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4 |
| Username | Not required |
| Password | Not required |
How to Configure Robi APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'Robi Internet' and APN to 'internet'.
- 7 Enter MMSC as 'http://10.16.18.40:38090/was' and MMS Proxy as '10.16.18.77' with MMS Port '9028'.
- 8 Set APN Type to 'default,supl,mms'.
- 9 Tap Save and select the new Robi APN from the list.
- 10 Restart your phone to apply the settings.
How to Configure Robi APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'internet' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'internet' and MMSC as 'http://10.16.18.40:38090/was'.
- 6 Set MMS Proxy to '10.16.18.77:9028'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring Robi APN settings.
- No data connection on Robi SIM
- Verify the APN is set to 'internet' with no extra spaces. Toggle Airplane Mode on and off after saving. Check that mobile data is enabled in your device settings. If the issue continues, reset network settings and re-enter the APN values.
- Cannot send or receive MMS on Robi
- Confirm the MMSC URL is 'http://10.16.18.40:38090/was' and the MMS Proxy is '10.16.18.77' with port '9028'. Mobile data must be active for MMS to function. Ensure the APN Type includes 'mms' in the comma-separated list.
- Robi 4G not showing on device
- Check that your device supports Robi 4G LTE bands used in Bangladesh (Band 3 at 1800 MHz). Set your preferred network mode to 4G/LTE in device settings. Ensure your Robi SIM is 4G-enabled by dialing *121# and checking your package details.
Robi APN Settings FAQ
What is the correct Robi APN for internet?
The correct APN for Robi 4G internet in Bangladesh is 'internet'. This is the standard access point name used by Robi Axiata for mobile data services. The same APN works for both prepaid and postpaid Robi subscribers. Enter it exactly as shown without capital letters or extra characters in your device APN settings.
What are the Robi MCC and MNC codes?
Robi uses MCC 470 (Bangladesh country code) and MNC 02 (Robi network identifier). These values are typically read automatically from the SIM card by your device. You only need to enter them manually if the fields appear blank in your APN configuration. Incorrect MCC or MNC values will prevent network registration.
How do I get Robi APN settings automatically?
Send a blank SMS to 8799 from your Robi number to receive automatic internet settings via OTA configuration message. You can also dial *140*7*2# to get the settings sent to your device. If automatic configuration fails, enter the APN values manually using the guide on this page for reliable internet connectivity.
Does Robi APN require a username or password?
No, the Robi APN configuration does not require a username or password. Leave both fields empty when creating the access point profile. The authentication type should be set to None. Pre-filled credentials from other carriers should be cleared before saving your Robi APN to avoid connection conflicts.
Can I use the same Robi APN for Airtel Bangladesh?
Yes, Robi and Airtel Bangladesh merged operations, and both brands now use the same network infrastructure with MCC 470 and MNC 02. The APN 'internet' works for both Robi and Airtel Bangladesh SIM cards. MMS settings including the MMSC URL and proxy values are also identical across both brands.