Banglalink APN Settings 2026 - 4G LTE Guide
Configure Banglalink mobile data settings on Android and iOS
Manually configure your Banglalink APN settings to enable 4G LTE mobile data and MMS in Bangladesh. The correct APN for Banglalink internet access is 'blweb'. Banglalink operates on MCC 470 and MNC 03 and serves over 30 million subscribers across Bangladesh. Unlocked devices and phones purchased abroad typically require manual APN configuration to connect to the Banglalink network.
Banglalink APN Settings
Use these settings to configure your Banglalink mobile data connection.
| Setting | Value |
|---|---|
| APN | blweb |
| MCC | 470 |
| MNC | 03 |
| Authentication | None |
| APN Type | default,supl,mms |
| APN Protocol | IPv4 |
| Username | Not required |
| Password | Not required |
How to Configure Banglalink APN on Android
- 1 Open Settings on your Android device.
- 2 Go to Network & Internet or Connections.
- 3 Tap Mobile Network or Mobile Data.
- 4 Select Access Point Names (APN).
- 5 Tap the + icon to add a new APN.
- 6 Set Name to 'Banglalink Internet' and APN to 'blweb'.
- 7 Enter MMSC as 'http://mmsc1:10021/mmsc/01' and MMS Proxy as '10.10.55.34' with MMS Port '8799'.
- 8 Set APN Type to 'default,supl,mms'.
- 9 Tap Save and select the new Banglalink APN from the list.
- 10 Restart your device to apply the changes.
How to Configure Banglalink APN on iPhone/iOS
- 1 Open Settings on your iPhone.
- 2 Tap Cellular or Mobile Data.
- 3 Select Cellular Data Network.
- 4 Enter 'blweb' in the APN field under Cellular Data.
- 5 Under MMS, enter APN as 'blweb' and MMSC as 'http://mmsc1:10021/mmsc/01'.
- 6 Set MMS Proxy to '10.10.55.34:8799'.
- 7 Go back to save the settings.
- 8 Restart your iPhone to apply changes.
Troubleshooting
Common issues and solutions when configuring Banglalink APN settings.
- No internet after inserting Banglalink SIM
- Ensure the APN is set to 'blweb' and not 'internet'. Some devices auto-configure the wrong APN name. Delete any existing Banglalink APN entries and create a new one with the correct values. Toggle Airplane Mode on and off after saving.
- MMS messages failing to send
- Verify the MMSC URL is 'http://mmsc1:10021/mmsc/01' and MMS Proxy is '10.10.55.34' with port '8799'. Mobile data must be enabled for MMS to work. MMS does not function over WiFi connections on most devices.
- Slow data speeds on Banglalink 4G
- Check that your device supports Banglalink 4G bands (Band 3 at 1800 MHz and Band 40 at 2300 MHz). Set the preferred network type to 4G/LTE in your device settings. Move to an area with stronger signal if speeds remain slow.
Banglalink APN Settings FAQ
What is the correct Banglalink APN name?
The correct APN for Banglalink 4G internet in Bangladesh is 'blweb'. This is the primary access point name used for both data browsing and MMS messaging. Some older guides may reference 'blinternet' or 'internet', but 'blweb' is the current recommended APN for Banglalink subscribers on all device types including Android and iOS.
What are the Banglalink MCC and MNC codes?
Banglalink uses MCC 470 (Bangladesh country code) and MNC 03 (Banglalink network identifier). These codes are typically auto-detected by your device from the SIM card. Manual entry is only required if the fields appear empty in your APN settings. Incorrect MCC or MNC values will prevent the device from connecting to the Banglalink network.
How do I get Banglalink APN settings automatically?
Dial *121# from your Banglalink number and navigate to the internet settings option to receive automatic APN configuration. You can also visit the Banglalink website or contact customer support at 121 for assistance. If automatic configuration does not work, use the manual settings provided on this page to set up your data connection.
Do I need a username and password for Banglalink APN?
No, Banglalink does not require a username or password for the 'blweb' APN configuration. Leave both fields blank in your APN settings. The authentication type should be set to None. If your phone has pre-filled credentials from a previous configuration, clear them before saving the new Banglalink APN profile.
Why does my Banglalink data keep disconnecting?
Frequent disconnections on Banglalink can occur due to weak signal, incorrect APN protocol settings, or network congestion. Set APN Protocol to IPv4 for the most stable connection. Check that your SIM card is properly inserted and not damaged. Restart your device after configuring the APN. If problems persist, visit a Banglalink customer center to check your SIM and account status.